Redesign Layout of the Hazardous Waste Storage Area for the Medical Device Manufacturing Industry
How to cite (AJARCDE) :
Hazardous waste is waste generated by a business or activity that has chemical, physical, or biological characteristics that pose a danger to human health and the environment. The medical device manufacturing industry generates hazardous waste, including used lubricating oil, used rags, product rejects, and fluorescent lamp electronic waste. This industry already has a hazardous waste storage facility that temporarily stores hazardous waste, but as the company grows, several new rooms or facilities will be needed to support the production process. Therefore, changes in waste production necessitate the redesign of the hazardous waste storage facility. The data collection method used primary data (field observations and interviews) and secondary data (Rintek Hazardous Waste Management and regulations applicable to hazardous waste management in Indonesia). Based on the findings of gaps and waste volume data, the number of containers was recalculated, and a space requirement analysis was carried out by grouping waste into compatible zones and ensuring physical separation. The selection of containers and packaging materials was adjusted to the waste's physical and chemical properties. The redesigned layout applies a separate block system based on a compatibility matrix so that incompatible waste is not stored side by side, with a safe distance of 60 cm in accordance with Minister of Environment and Forestry Regulation No. 6 of 2021.
Contribution to Sustainable Development Goals (SDGs):
SDG 3 – Good Health and Well-being
SDG 9 – Industry, Innovation, and Infrastructure
SDG 13: Climate Action
[1] D. Sagita Fitri et al., “Pengaruh Pengembangan Sektor Industri Terhadap Pertumbuhan Ekonomi Di Indonesia,” vol. 2, no. 1, pp. 204–215, 2025, doi: 10.61722/jrme.v2i1.3432.
[2] H. A. Prabowo R, “Kontribusi Industri Terhadap Pertumbuhan Ekonomi Nasional Industrial Contribution To National Economic Growth,” Variable Research Journal , vol. 02, no. 3032–4084, pp. 212–217, 2025.
[3] Y. Bersih, B. Afra, H. Haifa1, A. Yogi, and O. U. Kamal3, “Tantangan dan Solusi Pengelolaan Limbah Industri: Upaya Menuju Lingkungan,” Jurnal Ilmiah Wahana Pendidikan, vol. 10, no. 23, pp. 1133–1139, 2024.
[4] V. Alfianti, S. Rismawati, and N. Latifah, “Tinjauan Sistem Pengolahan Limbah B3 Pada Sektor Kesehatan Dan Industri,” 2025.
[5] A. Febrianti, K. N. Mufidah, U. Islam, N. Sayyid, and A. Rahmatullah, “Analisis Dampak Pencemaran Limbah B3 Terhadap Perairan serta Pengelolaannya,” Jurnal Ilmu Sosial dan Humaniora, vol. 1, no. 2, pp. 539–549, 2025, doi: 10.63822/2kn2re75.
[6] PP 22 TAHUN 2021, “Peraturan Pemerintah Republik Indonesia No. 22 Tahun 2021 Tentang Penyelenggaraan Perlindungan Dan Pengelolaan Lingkungan Hidup,” 2021.
[7] M. S. Y. Argia and M. F. Fadhil, “Evaluasi Dan Rekomendasi Pengelolaan Limbah Bahan Berbahaya,” Jurnal serambi Engineering, vol. 10, no. 1, pp. 12838–12845, Jan. 2025.
[8] E. Yafi Bachtiar and H. Cahyonugroho, “Redesain Tempat Penyimpanan Sementara Limbah B3 Pada Pabrik Pembekuan Ikan PT. XYZ Kabupaten Surabaya,” Jurnal Serambi Engineering, vol. X, no. 3, pp. 9390–9397, Jun. 2025.
[9] Y. S. R. H. , G. H. Afifazari Elfia N.R, “Redesain Tempat Penyimpanan Sementara (TPS) Limbah Bahan Berbahaya dan Beracun (B3) pada Perusahaan Jasa Pengangkutan Sesuai dengan Peraturan dan Limbah yang Dihasilkan,” Jurnal Praktik Keinsinyuran, vol. 1, no. 2, pp. 365–377, 2024.
[10] E. W. Fajriyah Siti Amalia, “Evaluasi Pengolahan Limbah Bahan berbahaya dan beracun (B3) di PT X,” Jurnal serambi Engineering, vol. 5, no. 1, pp. 711–719, 2020.
[11] R. Wardhani Eka, “Identifikasi Timbulan dan Analisis Pengelolaan Limbah B3 di Pabrik Kertas PT X,” Serambi Engineering, vol. 5, no. 3, pp. 1251–1261, 2020.
[12] E. Herliana, A. Gunawan, and N. L. Latifah, “Pengelolaan Limbah Bahan Berbahaya Dan Beracun (B3) Dari Laboratorium Pt Max Chem Indonesia,” 2024.
[13] A. B. Yudhistira, M. Abdus, and S. Jawwad, “Redesign Planning of B3 Waste Temporary Storage Site (TPS) of PT X Located in Pasuruan Industrial Estate Rembang (PIER),” 2025. [Online]. Available: http://envirous.upnjatim.ac.id/
[14] S. A. W. Pramestie I.S.D, “Evaluasi Pengelolaan Limbah Bahan Berbahaya,” Jurnal Teknik ITS, vol. 12, no. 2, pp. 95–102, 2023.
[15] S. S. Desnita and N. Halomoan, “Proyeksi Kebutuhan Kemasan Limbah B3 di PT. X,” 2024.
[16] V. W. R. Luthfi, L. Zohrah, and V. Ulya Bunga, “Kajian PengelolaanTempat PenyimpananLimbahBahan Berbahaya dan Beracun di Perusahaan Jasa Pengumpulan dan Pengangkutan,” Blend Sains Jurnal Teknik, vol. 4, no. 2, pp. 288–297, 2024, doi: 10.56211/blendsains.v4i2.1292.
[17] F. P. Putra, “Pengelolaan Limbah Bahan Berbahaya Dan Beracun (B3) Di Tempat Penyimpanan Sementara PT. X,” Jurnal Multidisiplin Ilmu Akademik, vol. 2, no. 5, pp. 613–619, Oct. 2025.
[18] A. Wahyu, A. Miyana, M. Nilam Kusuma, M. T. Lingkungan, T. Adhi, and T. Surabaya, “Studi Redesain Tempat Penyimpanan Sementara (TPS) Limbah B3 sesuai dengan Limbah yang Dihasilkan dan Peraturan Terbaru di PT X,” Environmental Engineering Journal ITATS ENVITATS, vol. 4, no. 1, pp. 38–47, 2024
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.